Multiprotocol

JR Module Adapter For FrSky X-LITE TBS Crossfire iRangeX IRX4 Multiprotocol JR Type TX Description: Item name: JR module adapter Color: black Size: 5.0*5.8*2.6cm Weight: 14g Usage: for TBS Crossfire, iRangeX IRX4 Multiprotocol TX Module, Jumper JP4IN1 Multiprotocol TX Module etc. JR Type TX module. Package included: 1 x JR Module Adapter 1 x Cable

Motive-RC JR TX Module Adapter with Neck Strap Hook For FrSky X-Lite R9M TBS Crossfire iRangeX IRX4 Multiprotocol JR Type TX Description: Brand name: Motive-RC Item name: JR TX module adapter Color: black Size: 5.0*9*4cm Weight: 20g Usage: for TBS Crossfire, iRangeX IRX4 Multiprotocol TX Module, Jumper JP4IN1 Multiprotocol TX Module, R9M, XJT etc. JR type TX module. Package included: 1 x JR TX module adapter 1 x neck strap hook (package doesn't include the transmitter neck strap ) 1 x Cable

Multiprotocol TX Module For Frsky X9D X9D Plus X12S Flysky TH9X 9XR PRO Taranis Q X7 Transmitter This Multiprotocol TX Module is suitable for many brand's quadcopters,helicopters and airplanes .You can control RC quadcopters,RC helicopters or RC airplanes flexibility when you insert the TX Module to your Frsky X9D/X9D Plus/X12S,flysky TH9X,Turnigy 9XR/9XR PRO transmitter. You will get many new ways to control the RC models . Description: Item name: Multi-protocol Radio-frequency Head Signal frequency: 2400-2483.5Mhz Controllable range: about 100m Input voltage: 6V-13.5V Supported remote controls: Frsky X9D/X9D Plus/X12S, Taranis Q X7, Flysky TH9X,Turnigy 9XR/9XR PRO Supported Remote control channel order: AETR Supported brand :Cheerson,Syma,Wltoys Eachine E010(Most of these brand's quadcopters, helicopters and airplanes are compatible but not every model.Specific models please check instruction under the note) Binding Procedure: 1. Creat a model in OpenTX using external module in PPM mode, 12 channels aNd AETR sequence order. 2. Turn off Taranis. 3. Power up quad. 4. While holding the appropriate stick pattern listed below, power up Taranis. Note: This Multiprotocol TX Module only supports remote control of AETR remote control channel order. Optimal system is Opentx/ER9X .But JR and TAER remote control channel order is not available now . More instruction of Multiprotocol TX Module,please click here Package included: 1X Multiprotocol TX Module

iRangeX iRX6 Multiprotocol TX Module for Flysky FS-i6 i6x Transmitter This Multiprotocol TX Module is suitable for many brand's quadcopters,helicopters and airplanes .You can control RC quadcopters,RC helicopters or RC airplanes flexibility when you insert the TX Module to your Flysky transmitter. You will get many new ways to control the RC models . Description: Brand name: iRangeX Item number: iRX6 Item name: Multi-protocol TX Module Signal frequency: 2400-2483.5Mhz Controllable range: 100m Input voltage: 3.7-4.2V (1S battery) Supported remote controls: Flysky FS-i6 FS-i6X Supported Remote control channel order: AETR Supported brand: Cheerson, Syma, Wltoys, Eachine E010 (Most of these brand's quadcopters, helicopters and airplanes are compatible but not every model.Specific models please check instruction under the note) Binding Procedure: 1. Creat a model in OpenTX using external module, 12 channels and AETR sequence order. 2. Turn off Transmitter. 3. Power up quad. 4. While holding the appropriate stick pattern listed below, power up Transmitter. Note: This Multiprotocol TX Module only supports remote control of AETR remote control channel order. More instruction of Multiprotocol TX Module, please click here Package included: 1X iRangeX iRX6 Multiprotocol TX Module

iRangeX IRX4 2.4G CC2500 NRF24L01 A7105 CYRF6936 4 IN 1 Multiprotocol STM32 TX Module With Case Description: The 4 in 1 wireless module integrate four RF chips (CC2500,NRF24L01,A7105,CYRF6936) into one single circuit board,with MCU baseplate,can support a variety of remote control protocols by identifying the PPM signal output of the remote control,such as Walkera DEVO,Spektrum DSM2,Flysky,Frsky,WLToys,Hubsan,Hisky,etc. It can control up to several hundreds airplanes (or receivers). This module can recognize the remote control PPM signal, then converted into the corresponding standard wireless remote control format,which means that in theory as long as the remote control is with analog functions, it can work. This Multiprotocol TX Module is the STM32 board, all protocols are included. It is suitable for many brand's quadcopters,helicopters and airplanes .You can control RC quadcopters,RC helicopters or RC airplanes flexibility when you insert the TX Module to your Frsky X9D/X9D Plus/X12S,flysky TH9X,Turnigy 9XR/9XR PRO transmitter. As long as your transmitter can use the Open TX firmware,it is compatible with this module. You will get many new ways to control the RC models. Specification: Brand Name: iRangeX Item Name: IRX4 Band: 2.4G Weight: About 40g Firmware: STM32 Dimension: About 49x22x65mm Antenna Length: About 108mm Compatible Transmitter: Frsky: All the frsky transmitter Futaba: Futaba S-FHSS transmitter Flysky: TH9X (Note: The plastic base of the pins on the transmit

iRangeX IRX4 Plus 2.4G CC2500 NRF24L01 A7105 CYRF6936 4 IN 1 Multiprotocol STM32 TX Module With Case Overview: This 2.4G Multi-protocol TX Module is STM32 ARM microcontroller based module. All available protocols are included in serial mode. It is suitable for many brand of quadcopters, helicopters and airplanes. This module integrate four RF chips (CC2500,NRF24L01,A7105,CYRF6936) into one single circuit board, it .supports a variety of remote control protocols ,such as Futaba S-FHSS, Walkera DEVO, Spektrum DSM2, DSMX, Flysky, Frsky, WLToys, Hubsan, Hisky, Esky Assan etc. You can control your craft flexibility with it and You will get much excellent experience with you favorite transmitter. Specification: Brand Name: iRangeX Item Name: IRX4 Plus Operating Voltage: 5-14V Operating Current: <=100mA Operating Frequency: 2.4G ISM band RF Power: +22dBm MCU: STM32F103CBT6(128K ROM, 20K RAM) Weight: 45g Features: Two operation modes: PPM mode and serial mode. - When in PPM mode, there are 31 different protocols (protocol NO.0 is reserved for serial mode) mapping to the 16-position protocol selection switch on the module. They are listed in the default protocols table below, when the green light is off, you can use the switch to choose protocol NO. 1 to NO.15, when the green light is on, you can choose protocol NO.16 to NO.31. - To turn on/off the green light, Please follow these steps: Turn off you transmitter, point the protocol switch to '0' hold and press the bind button of RF mo

IRangeX IRX4 LITE CC2500 NRF24L01+ A7105 CYRF6936 4 IN 1 Multiprotocol TX Module for Frsky X-lite Specification: Brand name: IRangeX Operating voltage:5-9V Operating current: <=180mA Operating frequency: 2.4G ISM band RF power: +22dBm MCU: STM32F103CBT6(128K ROM, 20K RAM) Weight: 32g Overview: This 4-in-1 TX module is suitable for FRSKY X-Lite. It integrates four RF chips (CC2500,NRF24L01+,A7105,CYRF6936) into one single circuit board, it supports a variety of remote control protocols, such as Futaba S-FHSS, Walkera DEVO, Spektrum DSM2, DSMX, Flysky, Frsky, WLToys, Hubsan, Hisky, Esky Assan etc. You can control your model flexibility with it, and you will get much excellent experience with you favorite transmitter. This module is compatible with the Multi-module project on github. It's based on STM32 microcontroller. All available protocols are included in serial mode. In this mode, it uses a serial protocol to communicate with your transmitter. The serial protocol does not require any hardware modifications, but you should update the firmware on your transmitter to the latest. Then the model protocol selection and binding is done from the Model Settings menu on your transmitter. For telemetry capable transmitters, the telemetry integration is done seamlessly with the transmitter firmware. How to use: 1. Refer to the website above, update your transmitter with proper firmware. 2. Screw down the antenna of module tightly, and then install TX Module to the module bay of your tr

URUAV TMX5 4 IN 1 A7105 CC2500 CYRF6936 NRF24L01+ Multi-Protocol Module Compatible FrSky X9D X10 Transmitter Overview: This 2.4G Multi-protocol TX Module is STM32 ARM microcontroller based module. All available protocols are included. It is suitable for many brand of quadcopters, helicopters and airplanes. This module integrate four RF chips (CC2500,NRF24L01,A7105,CYRF6936) into one single circuit board, it .supports a variety of remote control protocols ,such as S-FHSS, Walkera DEVO, Spektrum DSM2, DSMX, Flysky, FrSky, WLToys, Hubsan, Hisky, Esky, Assan etc. You can control your craft flexibility with it, and you will get much excellent experience with your favorite transmitter. Specification: (Manual) Brand Name: URUAV Item Name: TMX5 Operating Voltage: 5-14V Operating Current: <=100mA Operating Frequency: 2.4G ISM band RF Power: +22dBm MCU: STM32F103CBT6(128K ROM, 20K RAM) Weight: 45g Feature: Transmitter that supports the er9X/erSky9X or Open TX firmware can work with the module, The model protocol selection and binding is done from the Model Settings menu on the transmitter, For telemetry capable transmitters, the telemetry integration is done seamlessly with the transmitter firmware. For more information, Please refer to the Link below. https://github.com/pascallanger/DIY-Multiprotocol-TX-Module https://github.com/pascallanger/DIY-Multiprotocol-TX-Module/blob/master/Protocols_Details.md How to use: 1. Refer to the website above, update your transmitter with proper firmw

Beecore Lite Silverware Brushed Flight Controller Built in Bayang Protocol for Tiny Whoop Blade Inductrix E011 Jumper T8SG MTX9D MTXI6 Module Specifications: Item Name: Beecore Lite Silverware Brushed Flight Controller CPU: STM32F030 Six-Axis: MPU6050 ESC: All FETs are rated at 12A maximum. Support 6x15mm/7x20mm/8x20mm/8.5x20mm etc motors. Size: 26mm x 26mm, fully compatible with the Inductrix quad frame and mounting pattern Firmware : Silverware (BoldClash-BWHOOP-B-03) Receiver Module: XN297LBW Receiver Protocol: Bayang protocol Power Cable: 50mm, with JST-PH 2.0 connector Weight: 2.7g Features: - Support level mode and acro mode. Also it has the ability to change settings for custom builds, or to adapt to personal preferences by stick gestures. - Designed to work with current Tiny Whoop or Blade Inductrix frames - Built in Bayang protocol native receiver, compatible with almost radio transmitter with deviation firmware or deviation compatible transmitter module - The flight controller board comes pre-flashed with Silverware firmware, and pre-soldered 55mm power cable pigtail with JST-PH 2.0 connector, AKA PowerWhoop connector. Compatible Radio Transmitter: BETAFPV TX01 radio transmitter Radio transmitter of toy drone like JJRC H67, Eachine E011 etc, that using the Bayang protocol Jumper T8SG radio transmitter MTX9D multiprotocol module (Suit for Frsky Tanaris QX7 X9D X9D Plus X12S, Flysky TH9X, Turnigy 9XR/9XR PRO) MTXI6 multiprotocol module(Suit for Flysky i6, i6S, I6X, I1

Features: UFi Box: UFi Box is a powerful EMMC Service Tool that can Read EMMC user data, as well as repair, resize, format, erase, read write and update the firmware on EMMC in for Samsung, china phone SK Hynix, micron, and other brands. UFi Box is a tool to repair phones with the ability to: Repair EMMC Resize EMMC Format EMMC Write full data, erase fully Read boot1 Read boot2 Read EXT CSD Read User Data Update firmware Via test point Hardware Features: USB 2.0 High-Speed(480 Mbps) Modern design, with built-in LDO Voltage Out and external power source Secured with Java smart card and online system Multiprotocol ready, with 20 (13 usable) multi-purpose IO pins and 1 Full-Speed USB-HOST Integrated software managed over-current protection Software Features: Lowest-cost universal software platform in the market Work with standalone and user-friendly software Strong and secure software platform integrated with online(server based) security Planned to support as many as possible up-to-date repair solution Integrated file synchronising function Package included: 1 x UFi Box USB2.0 High-Speed + Smartcard 1 x UFI-Lite USB3.0 SuperSpeed uSD/eMMC Reader 1 x 2 In 1 eMMC/eMCP Socket (169-FBGA,153-FBGA,162-FBGA,186-FBGA) 1 x eMMC/eMCP Socket (221-FBGA) 1 x UFI ISP Adapter V2 1 x USB Data Cable 1 x USB to DC 5V External Power Cable Details pictures: