I Drone

i Drone i5HW Foldable WiFi FPV 0.3MP Camera Altitude Hold RC Quadcopter

Yi Zhan Yizhan i Drone i4S With 2MP Camera 6-Axis Gyro 3D Rolling RC Quadcopter RTF 2.4GHz

Eachine Novice-I 75mm FPV Racing Drone Spare Part Canopy Camera Mount Specification: Brand Name: Eachine Color: Transparent Black Weight: 1.5 gram Suitable for Eachine Novice-I 75mm FPV Racing Drone Package Included: 1 x Canopy

six-axis Gyro / 0.5MP camera / compass mode / 3D rollover / one key to return

Eachine Novice-I 75mm FPV Racing Drone Spare Part NC1102 1102 13500KV 1-2S Brushless Motor Specifications: Brand Name: Eachine Mode: NC1102 13500KV Configu-ration:9N12P Stator Diamter:11mm Stator Length:2mm Shaft Diameter: 1.5mm No.of Cells(Lipo):2S Suitable for NOVICE-I Motor Dimension(Dia.*Len):13.5mm*16mm Weight(g):2.9g Package Included: 1 x NC1102 13500KV Brushless Motor

AURORA RC TK-I 230mm Wheelbase 5 Inch 5mm Arm Carbon Fiber FPV Racing Frame Kit for RC Drone 106g Specification: Brand name: AURORA RC Item name: TK-I 230mm Frame Kit Meterial: Carbon fiber + 3D Printed Arm plate: 5mm Bottom plate:3mm Side plate: 2mm Flytower: 3 board Weight: 106g Recommend parts(Not included): Flight Controller: F3/F4 30.5X30.5MM Hole MAMBA F405 & 40A ESC Propeller: 5 Inch Camera: 28mm install camera Motor: 2204/2205 2207/2306/2405/2307/2308 Package Included: 1 x TK-I 230mm Frame Kit

Mini PDB power distribution board for Martian I II III Frame Kit Description: Item name: power distribution board Colour: Red Weight: 9.2 g Suit for Martian 190 mm / 230 mm / 255 mm Frame Kit package includes: 1 x power distribution board.

Eachine Novice-I 75mm FPV Racing Drone Spare Part 3.8V 300mAh 40C/80C Lipo Battery Specification: Brand name: Eachine Capacity: 300mAh Voltage: 3.8v Continuous Discharge Rate: 40C Instantaneous discharge rate: 80C Size: 55mmx11.5mmx6.5mm Weight: 7.7g Connector: PH2.0 Notes: Need 2pcs batteries for Series circuit Package Included: 1 x 3.8V 300mAh 40C/80C Lipo Battery

Features:The FS-A8S is a compact 1-way receiver designed for multi-rotor aircraft.It uses the AFHDS 2A(Automatic Frequency Hopping Digital System) protocol.Supports standard PPM(8CH) and i-BUS(18CH) output; DSC port: PPM/i-BUS/S.BUSCompatible with FS-i4, FS-i6, FS-i6S, FS-i6X, FS-i10, FS-TM8, FS-TM10, FS-GT2E, FS-GT2G, FS-GT2F RC transmitterNo ground interference ( Transmitting and receiving 1m from the ground): ��300mUltra-small size and ultra-light weight, can effectively save the space and reduce the aircraft's weight-bearing.

Features:The FS-A8S is a compact 1-way receiver designed for multi-rotor aircraft.It uses the AFHDS 2A(Automatic Frequency Hopping Digital System) protocol.Supports standard PPM(8CH) and i-BUS(18CH) output; DSC port: PPM/i-BUS/S.BUSCompatible with FS-i4, FS-i6, FS-i6S, FS-i6X, FS-i10, FS-TM8, FS-TM10, FS-GT2E, FS-GT2G, FS-GT2F RC transmitterNo ground interference ( Transmitting and receiving 1m from the ground): �?00mUltra-small size and ultra-light weight, can effectively save the space and reduce the aircraft's weight-bearing.

Specification: 1. Brand Name: Netac 2. Model: P500 Pro 3. Capacity: 64G, 128G, 256G 4. Speed Class: V30 UHS-I U3 5. Read Speed: 100MB/s 6. Write Speed: 40MB/s Features 1. V30 UHS-I U3 speed class, speed can be up to 100MB/s, it can support fluently photograph and full hd video and continuous shooting and full hd video recording. 2. IPX7 waterproof, high temperature resistant and shockproof design. 3. Widely compatible, compatible with devices with micro SDXC slots. Suitable for cell phones, cameras, drone, vehicle traveling data recorder and more. Packaged Included: 1 * Netac Memory Card

Brand Netac Compatibility Mobile Phone / Camera / Automobile Data Recorder / Drone / Monitor / MP3 / MP4 / Speaker / Tablet PC Capacity 16GB / 32GB / 64GB Read Speed Class 10(Max 80Mb/s) Feature Plug & Play / Large Compatibility Type TF Card Color & Type As Pictures Show Package Included 1* Memory Card

WIFI Drone Transmitter Controller Handle Phone Holder For DJI Mavic Pro Spark Eachine E50 E51 E52 Description: Item Name:Transmitter Controller Handle Phone Holder Bracket Usage for : DJI SPARK etc. WIFI drone. Funtion: Smartphone / Tablet Handle For DJI SPARK / Mavic / Yuneec Breeze / Zerotech Dobby / Hubsan H507A / WL Q343 / Hubsan X4 H501A AIR / Q323 WL / SYMA X5UW etc. It is also easy to play mobile games It's be used for: I Phone 6/7 / Hua wei / xiaomi / meizu / oppo / live / Suma sang / more than 4 inches of phone Easy to handle Easy to install Package Included: 1 x Transmitter Controller Handle

Eachine LCD5802D 5802 5.8G 40CH 7 Inch FPV Monitor with DVR Diversity Receiver Build-in Battery Notice: If the monitor can't record the PAL format video or the image is not complete, please update it as follow: 1. Download the file: Upgraded File and put it in Root of TF card 2. Turn on the monitor, it will auto update as the video shows. Review by Jim T. Graham (Administrator of RCgroups.com) : http://www.rcgroups.com/forums/showthread.php?t=2679041 Conclusion There is a lot to like about this unit. If your going to have an LCD like this you have to have diversity. The ability to utilize those two receivers when using your goggles is great. The built in lipo is also very handy and I really like that I can plug in an external lipo if needed. With a battery life of around 3 hours it lasted as long as I personally needed it and then some. The micro SD slot is accessible and visible, so it's easy to get in and out and know you have one in there. I also really like the hard plastic hood. The speakers are also great if wearing headphones bothers you. Finally, the most important thing for me is the DVR. It's super simple to turn on and off. The only issue I had was the screen would not turn off for me at one point. If this happens to you be aware that there is a reset button on the left side of the unit near the AV out port. It is the type you need to press in with a needle or toothpick. Other than that I had no issues with this unit. It is now my number one LCD/DVR unit that will

Description: Item Name: BN-808 Chip: GPS+GLONASS Working Voltage: DC 3.6-5.5V (recommend 5V) Baud Rate: 9600 Protocol Output: NMEA-0183 Interface: USB Pin Definition: NO. Name I/O Description Characteristic 1 VCC I Main power supply, DC input DC 3.6-5.5V (recommend 5V) 2 D- O USB interface D- USB Negative 3 D+ I USB interface D+ USB Positive 4 GND G Ground Ground Application: - Suitable for GPS high-precision positioning measurement, geodetic survey, resource exploration, cadastral survey, etc. - Suitable for intelligent transportation, ship, car navigation, aircraft positioning and navigation, bus company, vehicle and personnel location tracking, logistics, etc. - Suitable for outdoor sports and tourism adventures. - Suitable for precise timing of electricity, post and telecommunications, and communication networks. Package Included: 1x GPS Module

Novice-I biginner PID and Rate CLI command. Please click here to download and setting. Add external SBUS IBUS DSM2 DSMX Receiver for Novice-I FC, Click here. Specifications: Brand Name: Eachine Item Name: Novice-I 75mm 1-2S brushless whoop Drone RTF & Fly more Wheelbase: 75mm Size: 98mm*98mm*48mm Weight: 33g(without battery) Features: Nano X F4 pro flight controller Powerful and smoothly Betaflight OSD support ,easy to get RSSI, Voltage ,current from your goggles Camera Angle adjustable VTX power switchable 25mw~200mw Smartaudio ready change VTX bands, powers, channels via OSD Ready to fly Compatible both for 1s-2s Lipo/LIHV Spare parts specifications: Motor Mode: EX1102 KV options: KV13500 Configu-ration:9N12P Stator Diamter:11mm Stator Length:2mm Shaft Diameter: 1.5mm Motor Dimension(Dia.*Len):13.5mm*16mm Weight(g):2.8g Flight controller MCU:STM32F411CEU6 (100MHZ, 512K FLASH) Sensor: MPU-6000(SPI connection) Board size: 28.5 * 28.5MM Power supply: 1-2S battery input (DC 3.5-8.7V) Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready Built-in Frsky D8 SPI receiver Built-in Betaflight OSD(SPI Control) Built-in Current meter Max 28A Current meter scale set to 1175 Built-in 5V 1A BEC Built-in voltage detection Onboard 4in1 ESC MCU upgraded to EFM8BB21 Power supply: 2-4S LiPo/LiPo HV (7v/17v) Current: 5A continuous peak 6A (5 seconds) Support BLHeliSuite programmable Factory firmware: S_H_50_REV16_7.HEX Default protocol: DSHOT600 Internal Frsky NON-EU receiver Version SPI BUS recei

FeaturesUHS-1 U3 high efficiency, fast read speed up to 98MB/s to achieve rapid shoot.Great speed and performance for full HD video recording, high resolution pictures, mobile gaming, music and more.Compatible with devices with micro SDXC slots.Suitable for cell phones, cameras, drone, vehicle traveling data recorder and more.Waterproof, anti-magnetism, anti-extreme temperature and anti-X-ray.

FeaturesUHS-1 U3 high efficiency, fast read speed up to 98MB/s to achieve rapid shoot.Great speed and performance for full HD video recording, high resolution pictures, mobile gaming, music and more.Compatible with devices with micro SDXC slots.Suitable for cell phones, cameras, drone, vehicle traveling data recorder and more.Waterproof, anti-magnetism, anti-extreme temperature and anti-X-ray.

Features:UHS-1 U3 high efficiency, fast read speed up to 100MB/s to achieve rapid shoot.Great speed and performance for full HD video recording, high resolution pictures, mobile gaming, music and more.Compatible with devices with micro SDXC slots.Suitable for cell phones, cameras, drone, vehicle traveling data recorder and more.Waterproof, anti-magnetism, anti-extreme temperature and anti-X-ray.

FlySky FTr16S 2.4G 16CH AFHDS 3 RC Receiver Support i-BUS/S-BUS/PPM Output for RC Drone OVERVIEW: The FTr16s is a double antenna bidirectional receiver using the AFHDS 3 protocol It's compact, easy to install and can output using a standard PPM or i-BUS signal. Description: Brand Name: FlySky Item Name: FTr16S Receiver Channels: 16CH Size: 20*12*3.1mm Weight: 2g Wireless frequency: 2.4G Wireless Protocol: AFHDS 3 Remote control distance: 3500m (air) Range without interference 1m from the ground more than 1000m Channel Data: 1500us; Range: 900-2100us PWM channel: NO Antenna type : Dual antenna (92.5mm*2) Power: 3.5-8.4V Display: LED Indicator RSSI: Support Data interface: i.bus/s.bus/PPM Temperature range: -10 C - + 60 C Humidity range: 20%-95% Online update: support Attention: -Make sure the product is installed and calibrated correctly, failure to do so may result in serious injury. -Make sure the receiver's battery is disconnected before turning off the transmitter, failure to do so may lead to unintended operation or loss of contro -Make sure the receiver is mounted away from motors, electronic speed controllers or any device that emits excessive electrical noise -Keep the receiver's antenna at least 1 cm away from conductive materials such as carbon or metal -Do not power on the receiver during the setup process to prevent loss of control -The receiver can receive at distances further than it can transmitter from When the receiver goes out of its transmission range, som