DSF3_EVO_BRUSHED Flight Controller Built-in DSM2/DSMX Satellite Receiver For Eachine QX95 QX90 QX90C

DSF3_EVO_BRUSHED Flight Controller Built-in DSM2/DSMX Satellite Receiver For Eachine QX95 QX90 QX90C Note: DSM2/DSMX Manual This Flight Controller Update to DSM2/DSMX Protocol Satellite Receiver. Description: Brand Name: Eachine Item Name: DSF3_EVO_BRUSHED Flight Controller Built-in DSM2/DSMX Receiver Item NO.: QX958DS Dimension: 22mm*32.5mm Thickness: 1.2mm Weight: 3g Receiver: DSM2/DSMX Compatible Satellite Receiver Coreless motor plug: SH1.0 Firmware: SP RACING F3 EVO 1.13.0 Support work voltage: 3.6v~4.2v(1S Lipo battery) Features: 1.F3_EVO_Brush revision is out of the F3 EVO SP RACING is based on a SP RACING F3 EVO firmware 32 brush flight control. 2.Independent design of the circuit structure 3.Using STM32F303CCT6 + MPU6500, advanced hardware platform F3 guarantee more stable flight. 4.With a large and high quality current NMOS transistors, operating current of up to 10A or more. Each Brushed motor is equipped with freewheeling diodes. 5.Integrated 2.4G DSM2 6CH PPM Receiver. 6.With battery voltage detection and buzzer interface(solder pad) 7.LED_STRIP Function(solder pad) Connection diagram: Receiver configuration: 1. DSM2/DSMX Receiver: Enable Serial RX for UART3 from the ports tab in Cleanflight configurator. Set Receiver mode to RX_SERIAL, Select SPEKTRUM1024 for DSM2 Radio and Select. SPEKTRUM2048 for DSMX Radio from the Receiver tab in Cleanflight configurator Bind procedure: 1. Connect Flight controller to computer and open Cleanflight configurator From CLI tab t