TOMTOP Technology
Features:High effective GFSK modulate, communication design.126 channels jumping frequency automatically, high anti-jamming ability, to ensure works reliability.2.4G wireless DMX512 receiver/transmitter, witn 500m communication distance (visible distance).No time delay when signal data is transmitting, signal data is real time and reliably.DMX512 wireless receiver transmits standard DMX514 protocol data (generated by console) by wireless way.Work frequency section: 2.4GHz ISM band,126 channels frequency section.7 Groupsid code settable, user can use 7 groups individual wireless net without any interference with each other in the same place.The DMX512 wireless controller is ideal for stage lighting control.One transmitter can control many receivers.With tricolor LED displaying indicators, the wireless DMX512 can be used in all DMX lamps.Without wires, it's the perfect way to get rid of the trouble of winding wire.This product has a male plug and female plug distinction, the male plug (transmitter) is connected to the console, the female plug (receiver) is connected to the light, and one transmitter can control 512 lights.Operating manual:id code and LED color corresponding relationship:1: RED2: GREEN3: RED+GREEN4: BLUE5: RED+BLUE6: GREEN+BLUE7: RED+GREEN+BLUE1). Press momentary switch above the side led indicator to indicate id setting.2). Press again to set IC, to the color id desired, adding 1 each time you press the switch will advance the color idcode.3). Working condition:LED constant lit up: No DMX or wireless signal.Red LED flash: Transmitting.Green LED flash: Receiving4) RF frequency 2.400 - 2.525G, total 126 channels, it's searching automatically.5). id Code 1-7 groups id code, pressbuttonfor setting, it only can work under same id code of transmitter and receiver. ( Same LED Color )Establishing Communication:1. Power on DMX512 wireless received board first and then following to power up the transmitted board.2. Press button to set same id value of transmitted board and received board. Please use different id value if you need use more than 1 group wireless universals at same time in same place.3. The red LED flashes when transmitter transmits DMX data by no interfered frequency section, then receiver changes communicated frequency section. Green LED flashes until received same id value, the more DMX data, the faster the LED flashes.4. Communication was established correctly.
