9xr Pro

TOY-MTX TX Module for Frsky X9D X9D Plus X12S Flysky TH9X 9XR PRO Transmitter

Wolfbox 100mW 433MHz UHF Receiver Rx Compatible with X9D 9XR PRO FlySky 9 9XII Description: Item name: WOLFBOX receiver Channels: Default 1-8CH + RSSI, max 16CH (users can customize) Suitable models: Full range of models Frequency Range: 416-463MHz Transmit power: 100mW Scheduling Information: By transmitting end radio parameter adjustment Operating Voltage: 4-6.5V Receiving distance: Depending on the antenna Compatiblity: Compatible with X9D, 9XR PRO, Flysky 9, JR 9XII module etc. Note: This product only included receiver Package included: 1x WolfBox 100mW 433MHz receiver

Multiprotocol TX Module For Frsky X9D X9D Plus X12S Flysky TH9X 9XR PRO Taranis Q X7 Transmitter This Multiprotocol TX Module is suitable for many brand's quadcopters,helicopters and airplanes .You can control RC quadcopters,RC helicopters or RC airplanes flexibility when you insert the TX Module to your Frsky X9D/X9D Plus/X12S,flysky TH9X,Turnigy 9XR/9XR PRO transmitter. You will get many new ways to control the RC models . Description: Item name: Multi-protocol Radio-frequency Head Signal frequency: 2400-2483.5Mhz Controllable range: about 100m Input voltage: 6V-13.5V Supported remote controls: Frsky X9D/X9D Plus/X12S, Taranis Q X7, Flysky TH9X,Turnigy 9XR/9XR PRO Supported Remote control channel order: AETR Supported brand :Cheerson,Syma,Wltoys Eachine E010(Most of these brand's quadcopters, helicopters and airplanes are compatible but not every model.Specific models please check instruction under the note) Binding Procedure: 1. Creat a model in OpenTX using external module in PPM mode, 12 channels aNd AETR sequence order. 2. Turn off Taranis. 3. Power up quad. 4. While holding the appropriate stick pattern listed below, power up Taranis. Note: This Multiprotocol TX Module only supports remote control of AETR remote control channel order. Optimal system is Opentx/ER9X .But JR and TAER remote control channel order is not available now . More instruction of Multiprotocol TX Module,please click here Package included: 1X Multiprotocol TX Module

WolfBox 1000mW 433MHz Long Range UHF Transmitter TX 100mW Receiver RX Combo for X9D X12S 9XR Description: WOLFBOX LONG RANGE UHF TX Channel: Default 8CH, Max. 16CH(Users can customize) Frequency: 416-463MHz Transmission Power:1W Working Voltage: 6.5-28V Wide Voltage Input Input Signal: PPM Programme Method: bluetooth serial port, software programe Transmission Distance: Depends on the antenna Compatible with Frsky X9D,X12S,9XR,9XR PRO,Flysky 9,JR 9XII etc. JR Module WOLFBOX LONG RANGE UHFRX Channel: Default 1-8CH+RSSI, Max. 16CH(Users can customize) Frequency: 416-463MHz Transmission Power:100mW Working Voltage: 4-6.5V Configuration: Adjust parameter by wireless transmission Transmission Distance: Depends on the antenna Package Included: 1 x WOLFBOX 433 TX 1 x WOLFBOX 433 RX 2 x Antenna

iRangeX IRX4 2.4G CC2500 NRF24L01 A7105 CYRF6936 4 IN 1 Multiprotocol STM32 TX Module With Case Description: The 4 in 1 wireless module integrate four RF chips (CC2500,NRF24L01,A7105,CYRF6936) into one single circuit board,with MCU baseplate,can support a variety of remote control protocols by identifying the PPM signal output of the remote control,such as Walkera DEVO,Spektrum DSM2,Flysky,Frsky,WLToys,Hubsan,Hisky,etc. It can control up to several hundreds airplanes (or receivers). This module can recognize the remote control PPM signal, then converted into the corresponding standard wireless remote control format,which means that in theory as long as the remote control is with analog functions, it can work. This Multiprotocol TX Module is the STM32 board, all protocols are included. It is suitable for many brand's quadcopters,helicopters and airplanes .You can control RC quadcopters,RC helicopters or RC airplanes flexibility when you insert the TX Module to your Frsky X9D/X9D Plus/X12S,flysky TH9X,Turnigy 9XR/9XR PRO transmitter. As long as your transmitter can use the Open TX firmware,it is compatible with this module. You will get many new ways to control the RC models. Specification: Brand Name: iRangeX Item Name: IRX4 Band: 2.4G Weight: About 40g Firmware: STM32 Dimension: About 49x22x65mm Antenna Length: About 108mm Compatible Transmitter: Frsky: All the frsky transmitter Futaba: Futaba S-FHSS transmitter Flysky: TH9X (Note: The plastic base of the pins on the transmit

Beecore Lite Silverware Brushed Flight Controller Built in Bayang Protocol for Tiny Whoop Blade Inductrix E011 Jumper T8SG MTX9D MTXI6 Module Specifications: Item Name: Beecore Lite Silverware Brushed Flight Controller CPU: STM32F030 Six-Axis: MPU6050 ESC: All FETs are rated at 12A maximum. Support 6x15mm/7x20mm/8x20mm/8.5x20mm etc motors. Size: 26mm x 26mm, fully compatible with the Inductrix quad frame and mounting pattern Firmware : Silverware (BoldClash-BWHOOP-B-03) Receiver Module: XN297LBW Receiver Protocol: Bayang protocol Power Cable: 50mm, with JST-PH 2.0 connector Weight: 2.7g Features: - Support level mode and acro mode. Also it has the ability to change settings for custom builds, or to adapt to personal preferences by stick gestures. - Designed to work with current Tiny Whoop or Blade Inductrix frames - Built in Bayang protocol native receiver, compatible with almost radio transmitter with deviation firmware or deviation compatible transmitter module - The flight controller board comes pre-flashed with Silverware firmware, and pre-soldered 55mm power cable pigtail with JST-PH 2.0 connector, AKA PowerWhoop connector. Compatible Radio Transmitter: BETAFPV TX01 radio transmitter Radio transmitter of toy drone like JJRC H67, Eachine E011 etc, that using the Bayang protocol Jumper T8SG radio transmitter MTX9D multiprotocol module (Suit for Frsky Tanaris QX7 X9D X9D Plus X12S, Flysky TH9X, Turnigy 9XR/9XR PRO) MTXI6 multiprotocol module(Suit for Flysky i6, i6S, I6X, I1

Features:
Specially designed for Frsky transmitter, Incorporate CC2500 NRF24L01 A7105 CYRF6936 RF module in one single PCB board, supports more than 10 different protocols, such as Frsky, Flysky, WLtoys V2x2, Hubsan, Hisky and so on.
Control basically all of you toy-grade quad (Syma X1 X5C X8C X11 CX-10, H8C, Hubsan H107C H107D JXD 395 JJR/C 1000 X1 H21 H22 MJX X600 WLtoys V966 V262 V666 V676, to name a few) with one transmitter.
For this 4 in 1 module to work, soldering is required, if you're not comfortable with soldering, please practice first or have someone else to do it for you.
High quality and durable in use.
Features PA(Power Amplifier) and LNA(Low Noise Amplifier) for best performance.